Vz. 58 Pistol 7.62 7.5"

The Sa vz.58 pistol in 7.62x39 is manufactured by Czech Small Arms in Jablunka, Czech Republic and includes the following: 

- high quality hammer forged barrel
- chrome lined barrel bore
- patented push-down plate on bolt carrier to prevent misfire issues (Czech Small Arms vz. 58 firearms are the only vz. 58s manufactured with this vital part to ensure reliability)
- drilled and tapped side rail holes in receiver for do-it-yourself side rail installation for optic mounts (side rail and optic mount not included with pistol)
- semi gloss/matte black finish cured at 300 °F over phosphate.
- two 30 round magazines
- owner's manual
- cleaning kit
- sling
- 7 year warranty

Gas Piston Notes: The 7.5" pistol gas piston cannot be removed without a tool. To remove the gas piston, once the upper handguard jacket has been removed, use a cleaning rod section from the cleaning kit and insert the cleaning rod into the receiver (beneath the rear sight). Push the gas piston to the rear with the cleaning rod to compress the gas piston spring and then push down on the rear of the piston that is protruding from the gas piston hole in the receiver. This action will angle the gas piston upwards, away from the gas adapter/block, and the piston can now be removed using index finger and thumb.

Ammunition Notes: It has been confirmed while shooting the 7.5" vz. 58 Pistol 762 that the Wolf brand ammunition manufactured in the Ukraine is not loaded as hot as Wolf brand ammunition manufactured in Russia. The Ukrainian ammunition continued to cycle the pistol reliably, but casings were ejecting approximately half the distance of the Russian ammunition. It was also noticed that Golden Tiger ammunition (manufactured in Russia) did not eject as far as Russian manufactured Wolf ammunition.  Golden Tiger was reliable too, and casings ejected farther than Ukrainian ammunition, but Golden Tiger casings did not eject as far as the Russian manufactured Wolf brand.  From our experience of shooting the 7.5" vz. 58 pistol, we recommend the Wolf brand ammunition manufactured in Russia.

Pistol includes the glass-filled nylon US made trigger. The color of the finish is a semi gloss/matte black coating (cured at 300°F).   Hammer forged barrel is made from a high quality Chrome Molybdenum steel (4140) and IS chrome-lined.   The muzzle nut is removeable and the thread pattern is 14x1 right hand (standard vz.58 thread pattern). 

For those that receive an approved BATFE Form 1 SBR (short barreled rifle) for their vz.58, the sling swivel screw can be removed (receiver sling plate is held to the receiver by sling swivel screw).  Once the sling swivel screw and receiver sling plate is removed, any vz.58 stock can be readily attached to the vz.58 receiver.  This is a great 'do-it-yourself' Form 1 SBR.   SBR Warning: a stock can only be legally attached to this pistol after a Form 1 has been approved by BATFE.   Attaching a stock to the vz.58 pistol, without an approved Form 1, is a federal felony and conviction could result in 10 years imprisonment and a $250,000 fine.

Drilled and tapped holes for the receiver side rail ARE included in the purchase price of the pistol.   In other words, you can easily install our optional side rail by removing the two screws in the receiver and screw on the side rail with a hex/Allen wrench.   GUNSMITHING IS NOTREQUIRED TO ATTACH THE SIDE RAIL TO OUR VZ.58 PISTOL.   Do not forget to use high strength thread-locker on the screws while attaching the side rail.